background image

21

WARRANTY

Eaton warrants all products against defects in material and workmanship for a period of one (1) year

from the date of shipment to Buyer. This is a limited warranty limited to its terms. This warranty is

void if the product has been altered, misused, taken apart or otherwise abused. 

 ALL OTHER WAR-

RANTIES, EXPRESS OR IMPLIED, ARE EXCLUDED, INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE.

BUYERS REMEDIES

:  Eaton’s obligations and liabilities under the foregoing warranty are limited to

repair or replacement of the product without charge. To receive the required Return Goods Authori-

zation number (RGA), contact your local Durant distributor or call 1-800-540-9242 to get a list of

distributors in your area. A charge is made for repairing after the expiration of the warranty. IN NO

EVENT SHALL EATON BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS OR

IMPLIED WARRANTY OR NEGLIGENCE OR ANY OTHER DAMAGES WHETHER DIRECT,

IMMEDIATE, FORESEEABLE, CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSES IN-

CURRED BY REASON OF THE USE OR MISUSE, SALE OR FABRICATION OF PRODUCTS

WHICH  DO  OR  DO  NOT  CONFORM TO  THE TERMS AND  CONDITIONS  OF THIS  CON-

TRACT.

INDEMNIFICATION

:  Buyer agrees to hold Eaton harmless from, defend, and indemnify Eaton

against damages, claims and expenses arising out of subsequent sales of Durant products or prod-

ucts containing components manufactured by Eaton and based upon personal injuries, deaths, prop-

erty damage, lost profits, and other matters for which Buyer, its employees or sub-contractors are or

may be to any extent liable, including without limitation penalties imposed by the Consumer Product

Safety Act (P.L.92-573) and liability imposed upon any person pursuant to the Magnuson-Moss

Warranty Act (P.L.93.637), as now in effect or as amended hereafter. The warranties and remedies

provided for herein are available to Buyer and shall not extend to any other person.

COMPLIANCE WITH OSHA

:  Eaton offers no warranty and makes no representation that its prod-

ucts comply with the provisions or standards of the Occupational Safety and Health Act of 1970, or

any regulations issued thereunder. In no event shall Eaton be liable for any loss, damages, fines,

penalty or expense arising under said ACT.

This manual constitutes proprietary information of Eaton Corp., and is furnished for the customers’

use in operating the Durant counter. Reproduction of this material for purposes other than the sup-

port of  Durant counters or related products is prohibited without the prior written consent of Eaton

Corp., Watertown, WI.

In the construction of the Control described herein, the full intent of the specifications will be met.

Eaton Corp., however reserves the right to make, from time to time and without proper written notice,

such departures from the detail specifications as may be required to permit improvements in the

design of the product.

The information included herein is believed to be accurate and reliable; however no responsibility is

assumed by Eaton Corp., for its use; nor for any infringements of patents or other rights of third

parties which may result from its use.

This equipment is capable of generating radio frequency energy.  If not installed and used in accor-

dance with the instructions, this unit may interfere with radio communications.

Summary of Contents for Durant Eclipse Series
























Reviews: