IL17574C
Page 1-2
Effective Date: 2/04
IQ 300
Page 1-2
Effective Date: 2/04
For more information visit:
www.cutler-hammer.eaton.com
THE EQUIPMENT. ANY WIRING INSTRUCTIONS PRESENTED IN THIS
DOCUMENT MUST BE FOLLOWED PRECISELY. FAILURE TO DO SO
COULD CAUSE PERMANENT EQUIPMENT DAMAGE.
1.1.3
Factory Correspondence
For additional information, technical assistance or referral to a local authorized
distributor, contact Power Management Application Support (PMAS) at 1-800-809-
2772, option 1 / option 1.
1.2
PRODUCT OVERVIEW
NOTE:
Throughout this document, references to IQ 300 are intended for all Base
types in the series, the IQ 310, IQ 320, IQ 330 and the IQ 330M. Units with
functions and specifications that differentiate from the Base Unit are noted in the
relevant sections.
The IQ 300 is a microprocessor based series of monitoring devices that provide
single phase, 2 or 3 wire, and 3 phase, 3 or 4 wire electrical metering designed to
replace numerous individual meters and recorders. The IQ 300 series devices are
compact, and consist of a panel-mounted Display Module and a Base Module that
can be attached to the Display Module or mounted remotely. The devices are
password protected, menu driven and display a variety of user-selected electrical
system values and provide control over certain measurement and data output
functions. The IQ 300 series Base Modules communicate with the IQ 300 Display
Module, providing access to view and reset system, phase and min/max values, and
for providing viewing and editing of set points.
3 Phase
3 Phase
3 Phase
Single Phase
4 Wire
3 Wire
3 or 4 Wire
2 or 3 Wire
208 Y / 120 Vac
240 Vac
220 / 380 Vac
120 / 240 Vac
480 Y / 277 Vac
480 Vac
230 / 400 Vac
600 Y / 347 Vac
600 Vac
240 / 415 Vac
Typical System Wiring Configuration:
