IL17574C
Page 4-14
Effective Date: 2/04
IQ 300
Page 4-14
Effective Date: 2/04
For more information visit:
www.cutler-hammer.eaton.com
4.9.1
Password Setup
Once the View Setpt option is selected from the main menu the first screen to be
shown is the Password Setup screen
.
One of two screens will display.
One screen, figure 4.9, indicates that no password is necessary to change the IQ
300 set points or system parameters.
The other screen, figure 4.10, indicates that a password is required to change set
points or system parameters.
PASSWORD N
Figure 4.9 No
Password Required
PASSWORD Y
Figure 4.10 Pass-
word Required
4.9.2
INCOM™ Setup (IQ 320 and IQ 330 Base Modules only)
Scroll up or down until INCOM™ RATE or INCOM™ ADDR is displayed
.
The Incom Rate screen, shown in figure 4.11, indicates the baud rate at which the
IQ 320/IQ 330 will communicate over the PowerNet network. The Incom Address
screen, shown in figure 4.12, indicates the network address (in hexadecimal)
assigned to the IQ 320/IQ 330. The baud rate and the address must be set to the
values required by the PowerNet network for network communication to occur.
XXXX
INCOM RATE
Figure 4.11 Incom
Rate Display
XXX
INCOM ADDR
Figure 4.12 Incom
Address Display
4.9.3
MODBUS™ Setup (IQ 330M Base Modules only)
Scroll up or down until MODBUS™ RAT or MODBUS™ ADD is displayed.
The MODBUS Rate screen, shown in figure 4.13, indicates the baud rate at which
the IQ 330M will communicate over the MODBUS network. The MODBUS Address
screen, shown in figure 4.14, indicates the network address (in hexadecimal)
assigned to the IQ 330M. The baud rate and the address must be set to the values
required by the MODBUS network for network communication to occur. The
Modbus address should be limited by the user to 0FF (hexadecimal).