![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-iq-300-series/cutler-hammer-iq-300-series_instructions-for-installation-operation-and-maintenance_3796396051.webp)
Effective Date: 2/04
IL17574C
Page 4-13
IQ 300
Effective Date: 2/04
Page 4-13
For more information visit:
www.cutler-hammer.eaton.com
4.9
VIEW SET POINTS (3 AND 4 WIRE SYSTEMS)
This
menu
selection, shown in figure 4.8, permits the user to
view
but
not change
all
of the IQ 300 set points and system parameters. To
change
these values, proceed
to
section 4.10 Edit Set Points.
Select View Setpt from the main menu options. The list in figure 4.8 displays as the
scroll arrows are pressed.
VIEW SETPT
PASSWORD N
XXXX
MODBUS RAT
XXXX
INCOM RATE
XXX
INCOM ADDR
XXX
MODBUS ADD
XX
FREQ IN HZ
X
3/4 WIRE
X:X
CT RATIO\5
X.X:X
PT RATIO\1
X
Demand
WINDOW MIN
KYZP NONE
X
KYZ RATE
O A1 PHASE
1
O A2 PHASE
1
XX
TRIP VALUE
EXIT SMENU
ENTER
ENTER
Figure 4.8 View Setpoints
1
The output setting will
show one of the following:
PHASE, MSG, VOLT or
NULL, depending on your
selection.
IQ 330 ONLY