22
Mounting and operating instructions compact emergency power supply CEAG LP-STAR
40071860247 (L) September 2018 www.ceag.de
4 Transport, packaging and storage
4 Transport, packaging and storage
4 .1 Safety instructions
ATTENTION!
Property damage! The device can be damaged or
destroyed if it is not transported correctly .
The following safety instructions must therefore always be
observed:
• Always move the device with extreme care and attention.
• Avoid any contact with dust and moisture during transport.
Batteries
Always observe the manufacturer’s instructions when
transporting and storing the batteries.
4 .2 Transport inspection
Immediately check the delivery upon receipt for completeness
and any transport damage. In the event of clearly identifiable
external transport damage do not accept the delivery or only
accept it under reserve.
4 .3 Packaging
If no take-back agreement for the packaging has been
concluded, separate the materials according to type and size
and place them in the recycling container.
ATTENTION!
Always dispose of the packaging material in an
environmentally sound manner and in accordance with
the valid local waste disposal regulations . If necessary
consult a recycling company .
Always observe the handling instructions on the packaging!
4 .4 Storage
Store packages unopened until assembly and according to
the orientation and storage markings on the outside.
Only store packages under the following conditions:
• Never store outside
• Always store in a dry, dust-free place
• The storage space should be clean and organised
• The storage time should be as short as possible in the
interests of the user (FIFO method)
• The stacking of palettes or devices is not permitted
When storing batteries the following must be observed:
• When storing batteries as replacement parts the
instructions in the assembly and operating manual must
be observed.
• If the power supply for the LP-STAR device is interrupted
for several
days
the battery circuit must be activated (See
“8.4 Switch-off batteries for mainterance service”). This
must be carried out by a qualified electrician.
