28
Cable Configuration
Cable
Configuration
Cable Configuration
The cable for the Deutsch connector shall be:
•
16 GXL max 18 TXL min for Communication and Control wires
•
12 GXL for Power Supply wires
•
12 GXL or 14 SXL for V-Ignition wires
The cable for the 3-Way Metri-Pack connector should be:
•
10 SXL for Power Supply wires to Electric Clutch Actuator
The cable for the 8-Way Metri-Pack connector shall be:
•
18 GXL max 18 TXL min. for Communication and control wires to Electric Clutch Actuator
•
18 GXL for V-Ignition wires
Note:
These sizes ensure proper connector sealing and current carrying capacity.
•
Splices must be ultrasonically welded per IPC/WHMA-A-620 and encapsulated and sealed to meet SAE-J1455.
•
Convoluted Conduit shall have a service temperature of at least 257° F (125° C).
•
Braided Loom shall have a service temperature of at least 280° F (138° C). Coverage: A minimum of 10 / maximum of
12 picks per inch. TWISTED CABLES
• 2 Cables = 10 Twists / 25.4 cm • 3 Cables = 8 Twists / 25.4 cm
• (16 and 18 Gage Cable Only)
SAE Wire
Size mm
2
SAE Wire
Size No.
Nominal Outside Diameter (mm)
Nominal Outside Diameter (in.)
TXL
GXL
SXL
TXL
GXL
SXL
0.8
18
1.98
2.39
2.72
0.08
0.09
0.11
1
16
2.24
2.59
3.05
0.09
0.10
0.12
2
14
2.62
2.97
3.58
0.10
0.12
0.14
3
12
3.25
3.63
4.14
0.13
0.14
0.16
5
10
3.96
4.45
4.95
0.16
0.18
0.20
Cable Connector (Deutsch) - DRC26-38S01-P017
Seal Range
(mm) (in)
/
Contact Size
Description
Cable
Diameter
Min (mm
2
)
Cable
Diameter
Max (mm
2
)
TXL
GXL
SXL
1.02 - 2.41
0.095
/0.040 -
20
Signal
1.02
2.41
16
6
NR
3.40 - 4.95
0.195
/0.134 -
12
Power
3.40
4.95
NR
12
NR
3.40 - 4.95
0.195
/0.134 -
12
Ignition
3.40
4.95
NR
12
14
