30
Cable Configuration
Cable
Configuration
Contact Lubrication Application
Contact Lubrication Recommendation
Note:
Eaton recommends the use of (NyoGel 760G) on all electrical contacts. The preferred method of application is to use a
metered dispensing mechanism that places the material on the socket of the connector. It is also preferred that the mate-
rial be placed immediately prior to connector mating to reduce the probability of contamination.
•
For further information contact your Eaton OEM Engineering Support Group.
•
The NyoGel 760G material shall not be applied to the transmission ECU 38-Way (Vehicle Interface) connector jack-
screw. No anti-seize, lubricating, or foreign compound shall be applied to the connector jackscrew threads. The use of
such compounds may affect jackscrew torque and prevent proper sealing of the connector.
The recommended minimum material volume for the MetricPack 150 speed sensor contact is 0.004 CC per socket.
The recommended minimum material volume for the Deutsch size 20 contact is 0.004 CC per socket.
The recommended minimum material volume for the Deutsch size 12 contact is 0.024 CC per socket.
Transmission ECU Jackscrew Torque
Connector jackscrew torque shall be 25 +/- 3 lb-in. (2.82 +/- 0.33 Nm).
The Nyogel 760G material shall not be applied to the Transmission ECU 38-Way (Vehicle Interface) connector jackscrew. No anti-
seize, lubricating, or other foreign compound shall be applied to the connector jackscrew threads. The use of such compounds
may affect jackscrew torque and prevent proper sealing of the connector.
