Eaton 93PM UPS, Installation And Operation Manual

Page: 106 / 146

UPS Operating Instructions
6-8 Eaton 93PM UPS (20–50 kW, 480V Four Wire – 50 kW Frame) Installation and Operation Manual P-164000540—Rev 4 www.eaton.com/powerquality
6.2.6 Display Menu Operation
Table 6-3 describes the menu functions and how to use them.
Table 6-3. Display Menu Operation
Function Subfunction Operation
Home An overview of UPS operation, including information on load, efficiency and consumption.
Meters – UPS The meter screens show the UPS meter readings for the unit. The default voltage displayed on these
screens is phase-to-neutral. These can be changed to display the voltage phase-to-phase
(A-B, B-C, C-A). Tap the
METERS tab on the main menu navigation bar to display the METER
SUMMARY screen (see Figure 6-7). The current UPS readings are displayed in the information area of
the screen. To display individual meter details, tap the desired meter button to display the detailed
meter screen.
Output – UPS The Output screen shows output voltage (phase

to

neutral), output current (each phase), and frequency
being supplied by the UPS, as well as the kVA, kW, and power factor measurements.
Input – UPS The Input screen shows input voltage (phase

to

neutral), input current (each phase), and frequency of
the incoming utility source, as well as the kVA, kW, and power factor measurements.
Bypass The Bypass screen shows the bypass input voltage (phase

to

neutral), input current (each phase), and
frequency of the incoming utility source, as well as the kVA, kW, and power factor measurements.
Battery – UPS The Battery screen displays the battery voltage (Vdc) and the battery current (Idc).
Mimics UPS Mimic Tap the MIMICS tab on the main menu navigation bar to display an overview of UPS operation,
including information on load, efficiency and consumption. If there is an error, an error indicator is
displayed next to the affected part. Active events log can be opened by tapping the error indicator.
UPS Module Map Tap the UPS MODULE MAP tab on the secondary menu navigation bar to display the status of each
UPM.
System Overview Tap the SYSTEM OVERVIEW tab on the secondary menu navigation bar to display the status and
meters summary for each UPS.
ESS Tap the ESS tab on the secondary menu navigation bar to display the approximate consumption and
energy savings of ESS mode.
Logs Active Tap the LOGS tab on the main menu navigation bar to display the ACTIVE EVENTS screen (see
Figure 6-8). A listing of all system events that are currently active is displayed. The most recent event
is listed first. As events clear, they are removed from the Events listing. To scroll through the events,
press the up or down scroll bar.
System Log (Historical) Tap the SYSTEM LOG tab on the secondary menu navigation bar to display the SYSTEM LOG screen
(see Figure 6-9). The history Log lists up to 512 events in chronological order, with the most recent
event listed last (once 512 is reached, the earliest event is overwritten). The end of the log (the most
recent events) is displayed first; scroll upward to view older event listings. To scroll through the
events, press the up or down scroll bar.
Settings Configurable system settings. Tap the SETTINGS tab on the main menu navigation bar to display the
settings screen. Settings may be password restricted. Settings Level 2 default password is 0101.
User Tap the USER tab on the secondary menu navigation bar to display the USER screen (see Figure 6-10).
Tap the INFORMATION or ABOUT button to display system information (see Figure 6-11 and
Figure 6-12).
Configuration Tap the CONFIGURATION tab on the secondary menu navigation bar to display the screen. Tap the
function to be changed. Make and save the changes. Follow screen prompts to accept or abort
changes. For additional functions, tap the 2 button. See Figure 6-13 and Figure 6-14 for configuration
screens.
Statistics Statistics Summary Tap the STATISTICS tab on the main menu navigation bar to display a summary of UPS statistics (see
Figure 6-15).
Statistics Details Tap the desired statistic button to display the detailed statistic screen.
Controls See paragraph 6.2.8 for details.