36
Eaton 93PM Integrated Accessory Cabinet-Distribution (50–200 kW) Installation and Operation Manual P-164000229—Rev 09
18. Remove the screws along each adjacent cabinet top panel securing the top panels. Retain the hardware
for later use.
19. Install the top splice bracket between the adjacent cabinet and secure the tie strap with retained hardware.
NOTE
Optional front and back floor mounting brackets are available to order for permanently
mounting the IAC-D.
20. If permanently mounting the IAC-D, proceed to
; otherwise, continue to
21. Locate the front and back floor mounting brackets from the optional floor mounting kit.
22. Using the cabinet mounting bolts from the kit, install the floor mounting brackets to the front and rear of
the IAC-D with the angle facing outward.
23. Secure the cabinet to the floor with customer-supplied hardware.
24. Proceed to paragraph
Installing IAC-D External Power Wiring
Figure 14. Line-Up-and-Match Wiring Access Locations
Inter-cabinet wiring access
to route interface wiring
between cabinets.
Inter-cabinet wiring access
knockouts. Remove knockouts
as required to route power
wiring between cabinets.
Left Side View
Right Side View
Summary of Contents for 93PM IAC-D
Page 108: ...P 16400022909 P 164000229 09...
