Easytech s.r.l.
– Genu Iso/Plus User’s Manual
rev. C
Pag.
55
di
97
1
1
–
GONIOMETER THAT INDICATES THE ANGLE- check the correct indication
2 - SETTING THE RANGE OF MOTION (ROM)
-
Set the joint range. During the
eccentric phase, the lever moves within the set range. Please be particularly careful
in doing this, because the incorrect setting angles could result in serious damage to
the
articulation
of
the
patient.
For the correct setting angles limit is necessary to set the correct angle of the limb:
➢
Bring the leg in flexion angle limit and press the Auto button next to the
command setting the limiting flexion.
➢
Bring the leg angle limit extension and press the Auto button next to the
command setting the limiting extension.
You can also set the angles through the sliders in the same manner just described
for the setting of all the other parameters.
To continue with the exercise, you need to enable the range of motion (ROM) by
clicking on the ball to the left of the command.
3 - ENABLE/DISABLE TORQUE LIMIT
–
It w
ill indicate on the chart during operation
the maximum torque that can reach the patient.
Its default is the maximum value of
the previous exercise.
Click on the arrow at the bottom right to continue with the exercise.
2
3
Summary of Contents for Isokinetic Genu Iso
Page 65: ...Easytech s r l Genu Iso Plus User s Manual rev C Pag 65 di 97 ...
Page 84: ...Easytech s r l Genu Iso Plus User s Manual rev C Pag 84 di 97 ...
Page 95: ......
Page 96: ......
