easytech Isokinetic Genu Iso User Manual Download Page 54

Page: 54 / 97

Easytech s.r.l.

– Genu Iso/Plus User’s Manual



rev. C

Pag.

5.5

PASSIVE MOVEMENT EXERCISE (PM)

By selecting the “

PASSIVE MOVEMENT (PM)

” from the main page, the follow

ing window

will open:

The selection screen of the parameters is similar to all others.

Only the adjustable range of angular speed will change - in this case 5°/s at 20°/s.

5.5.1

Gravity compensation

The compensation of gravity is identical to the other cases, during the Passive
movement it serves only to set the torque limit function properly without taking account
of the weight of the limb.

5.5.2

Setting the limits

Clicking on the right arrow you proceed with the execution of the exercise, passing

through the page of the range of motion setting (ROM).

Summary of Contents for Isokinetic Genu Iso


































































































Search results

Summary of Contents for Isokinetic Genu Iso

Reviews:

Brands by name

Popular brands

easytech Isokinetic Genu Iso, User Manual

Search results

Summary of Contents for Isokinetic Genu Iso

Reviews:

Brands by name

Popular brands