EasyIO
EIO-75 032719
Party Mode (Boost)
71
.5
°F
Room
73
.8
°F
PARTY ICON, PRESS TO
ACTIVATE THE BOOST, TO
CANCEL RE-PRESS
71
.5
°F
6 mins.
Remaining
CANCEL PARTY MODE
WHEN ACTIVE
INDICATES THE CURRENT
REMAINING PARTY MODE
TIME
°F
°C
°F
°C
The
EIO-75
interface has a PARTY MODE
button. When the PARTY MODE (BOOST)
TIME has been set, and the PARTY MODE
icon is pressed, the PARTY MODE is
activated (icon turns red).
In the PARTY MODE the device activates the
interface relay and the status is available over
the network. The PARTY MODE can be
cancelled by pressing the PARTY mode
button.
NOTE: If the relay mode has been to
NETWORK, the party mode has no effect on
the relay.
Frost Icon
Frost icon can be set via network to display frost
condition (or defrosting).
71
.5
°F
Room
20
.1
°F
Target
A
FROST ICON
°F
°C
Cleaning Mode
After entering FURTHER INFORMATION screen, by selecting the CLEANING icon, it is possible to
activate the cleaning mode. The
EIO-75
will enter a "Clean Screen" state where all touchscreen
presses are ignored and 30 second countdown timer is displayed. This allows cleaning of the
interface.
A/C and Lights Buttons
It is possible to enable A/C and LIGHTS buttons. The
buttons and their current status is displayed on the
front screen.
71
.5
°F
Room
70
.1
°C
LIGHTS
STATUS, AND
ON/OFF
SWITCH
LIGHTS
ON
LIGHTS
OFF
A/C STATUS,
AND ON/OFF
SWITCH
A/C ON
A/C OFF
°F
°C
When touching the buttons, the Lights and/or AC
Icon are either swithed ON or OFF. The status of the
buttons is available over the network. It is also
possible to override the Icons ON or OFF over the
network.
The buttons are enabled through the Maintenance
Mode in the Display settings.
EasyIO Holdings
www.easyio.com
