background image

EasyIO

EIO-75 032719

Energy Ring Display

The 

EIO-75

 has a large ring around the target temperature ("energy ring"). The ring color can be 

set from the network, or it can automatically change density between red-grey-blue by calculating 
the difference between the target and sensor 1/2/3 temperature.

The ring 

color

 has the following options:- .

RING 

color

 ADJUSTABLE 

OVER NETWORK

RED

BLUE

WHITE

GREEN

ORANGE YELLOW MAGENTA CYAN

0 = White
1 = Red
2 = Blue
3 = Green
4 = Orange
5 = Yellow
6 = Magenta
7 = Cyan
8 = Sensor 1
9 = Sensor 2
10 = Sensor 3 (Default)

Lock Mode

0000

8 9
5 6 -
2 3

Esc

OK

Del

Lock Code

Enter Code

7
4
1
0

After entering FURTHER INFORMATION screen, by selecting 
the LOCK icon it is possible to lock the user interface. Now by 
entering the LOCK CODE (default 0000), the 

EIO-75

 lock state 

can be activated.

The lock mode can be configured to work in different ways:-

DISABLED: Lock Mode Icon Not Available

ADJUST ONLY: Allows Temporary Temperature Adjustment 
Only

SCHEDULES ONLY: Allows adjustment of the Programmed 
Times

NO INPUT: All Buttons Locked

Alarm Display

When entering FURTHER 
INFORMATION AND SETTINGS 
screen and an alarm is active, 
select the alarm icon for more 
information. 

FURTHER SETTINGS AND 
INFORMATION

SELECT ALARM ICON FOR 
MORE INFORMATION

Notifications

Internal Sensor Failure
External  Sensor 1 Fault
External Sensor 2 Fault
Digital Contact Fault
Time Lost

The typical alarm reasons are:

•External sensor 1 (Res1) fault
(when activated; not connected)
•External sensor 2 (Res2) fault
(when activated; not connected)
•Built-in sensor fault
•Digital Contact Fault

Note:

 If the sensor source has 

been set to 

Network 

then the 

alarm is inhibited.

External Sensor RI1  and RI2 
Inputs

A remote NTC10k3 sensor can be connected to the RI1 and RI2 input and used for the monitoring 
purposes. The measurement is always available over the communications network. If configured the 
reading is also showed on the display in the SMALL ACTION CIRCLE area. 

Lock Mode Options

Icon Active

Lock

Up and 
Down/
FAN

PARTY 
MODE / 
OFF

ECO

AC

Lights

DISABLED

NO

YES

YES

YES

YES

YES

ON/OFF ONLY

YES

NO

YES

NO

YES

YES

ADJUST ONLY

YES

YES

NO

NO

NO

NO

NO INPUT

YES

NO

NO

NO

NO 

NO

EasyIO Holdings
www.easyio.com

Summary of Contents for EIO-75 Series
























Reviews: