Remote engine start method is keep pressing the start button on key fob for 5 seconds, once the car is
started,siren beeps twice& the car door will be lock automatically.
Note:
A.Once the car is remote engine started, engine will keep running for 18 minutes. If you do not step the
foot brake pedal in 18 minutes, engine will shut off automatically.
B.Once the car is remote engine started, you can keep pressing the start button for 5 seconds to remote
shut off the engine. And you should do this in 18 minutes before the engine automatically shut off.
C.Once the car is remote started, and user approach the vehicle with key fob to automatically unlock the
car or press unlock button on key fob to unlock the car door, you can't use remote engine cut off
method to shut off the car. And you can step on foot brake pedal and short press the push start button
once to shut off the engine.
D.If you connect the foot brake wire from EC003 with constant 12V wire in your vehicle, or when you're in
PKE induction range, you can't use remote engine start function.
Once the device is equipped with shock sensor and in arm status, any hit or force on the vehicle will
trigger the alarm and siren will beep and turn signal light will flash 5 times at the same time.
This feature only available when the device is equipped with shock sensor in the device.
11. Shock alarm warning(optional)
A.The vehicle will automatically shut off the engine if you do not step the foot pedal in 18 minutes once
the car is remote started.
12. 18 minutes time cut off once the car is remote started.
C.Press unlock button
on key fob once to unlock the vehicle will cancel the countdown the
automatically engine cut off in 18 minutes feature.
B.If you step the foot pedal in 18 minutes once the car is remote started, the car will not automatically
shut off the engine.
D.Once the car is remote started, you can use the push start button to shut off the car as well.
When the car is in arm status, if the car door is opened illegally or the ACC is triggered illegally, it will
trigger the alarm and siren will beep 25 seconds and turn signal light flashes at the same time
13.Illegal door opening or ACC trigger
14.Central door locking automation
Once the car is started for 15 seconds and not step on the foot pedal any more, the central door will
automatically lock the car door. Once the car is stopped, the central door will automatically unlock the car
door.
If the remote control is lost, you need to perform an emergency override to use the car. Step is as below:
use mechanical key to unlock the car door (will trigger the alarm), then keep pressing the reset switch for
5 seconds will disarm the alarm system. Now you can start the car.
16.Emergency disarm & start the car
In arm status, keep pressing the reset switch for 5 seconds will disarm the car, turn signal light flashes 3
times and siren beeps 3 times to confirm.
If the push start button was broken, the reset switch can act as push start button usage & you can use it
to start the car. The method is stepping on foot brake pedal and press the reset switch once will start the
car.
15.Emergency override
17.Programming method
The alarm can do programming for 4 key fobs maximum.
Note: the key fob included with the alarm control module are already programmed and you no need to
program them.
keep pressing the programming switch for 10 seconds till turn signal light keep lighting on, then release it,
turn signal light will keep lighting on, at this time, press any button on key fob once, siren beeps twice at
the same time, this means the first key is succeed programmed.
Press any button on next key fob to do programming on it and repeat same operation to program the
other key fob.
If there is no programming for 3 seconds, the device will exit programming status and siren beeps once
and turn signal light will turn off.
EC003 Wiring diagram
-14-
©
EASYGUARD
Electronics
.
All
right reserved.
-13-
©
EASYGUARD
Electronics
.
All
right reserved.
unit
While disarmed, stepping on foot brake pedal and short press the start button 1 second, the car will be
started. Car starting time is around 0.8 second. The LED indicator will stay light on once the car is
started.
C.Push button to stop
Once the car is started, stepping on foot brake pedal and short press the push button 1 second will shut
off the car. At the same time, the led indicator on the push button will turn off.
B.When the foot brake pedal is not depressed
9.Push button start/stop
A.When stepping on foot brake pedal
While disarmed, with foot brake pedal is not depressed and short press the push button once will turn on
ACC. Press the push button once again will turn on ON dashboard and press it once again will turn it
OFF. Repeat same operation will shift among ACC—ON—OFF. The engine start button will keep flashing
when turn on ACC & ON.
a.When the car is running and remote control (key fob) is taken away, the alarm will be automatically set
to arm status once the car is stop and open car door then close. After that, the car will be unable to start
except the alarm detect the key fob (remote control) is bought nearby.
In cold winter or other special situation, you can keep stepping on foot brake pedal and keep pressing
the push button to start the car till the car is started. The maximum time you can keep pressing start
button time is 3 seconds. If pressing 3 seconds but still unable to start the car, please try again.
Notes:
c.In normal condition, when stepping on foot brake pedal and push the button to start the car, the led on
the push button is turn on. If the LED is turn on but the car is unable to start, need to check if the starter
wire & foot brake wire are correct connected and the alarm control module is working well or not.
10.Start the car in cold weather or other special situation.
b.You can also use remote engine start function for backup purpose to start the car.
d.For some diesel cars that need to pre-warm the spark plug & engine starting time is more than 3
seconds, you can turn the car to ON position first to pre-warm the spark plug, then start the car or add an
extra timer delay switch.
