Safety warning
Installation guide
1.Before starting the installation
2.Deciding on components locations
3.Alarm antenna mount position
4.PKE antenna mount position
Making your wire connections
Main wire harness introduction & note 1-13
Engine start button size & color introduction
Key FOB buttons introduction & function description
2-3
3-4
4
4
5-6
6-7
7-10
10
10-11
Index
1.Arm/lock
2.Disarm/unlock
3.Mute alarm turn on/off setting
4.Remote trunk release
5.Panic mode
6.PKE-passive keyless entry
7.To enable or disable PKE function
8.Remote engine start/stop
9.Push button start/stop
10.Start the car in cold weather or other special situations
11.Shock alarm warning (optional)
12.18 minutes timer cut off once the car is remote started
13.Illegal door opening or ACC trigger
14.Central door locking automation
15.Emergency override
16.Emergency disarm & start the car
17.Programming method
Wiring diagram
Central door locking installation
Manual for releasing steering lock
Installation for chip immobilizer
Technical parameter
FAQS of EC003
Warranty information
Function description
11
11-12
12
12
12
12
12
12-13
13
13
14
14
14
14
14
14
14
15-16
16-21
22
23-24
24
25-26
26
Thank you for purchasing our products. This alarm is combining with PKE (passive keyless entry),
remote engine start and smart push start/stop functionally all into one. Please read the user manual and
wiring diagram carefully before you start installation. Once the alarm is properly installed, it can protect
your vehicle and improve the safety of your vehicle.
Dear Customer,
The item can work with most DC12V vehicles on the market, including gasoline (petrol) and diesel vehicles.
User Manual &
Wiring Diagram of EASYGUARD EC003
WARNING:
Keep the whole kits away from children under 3 years old!
IMPORTANT:This product is intended to be installed by a professional car alarm installer only! Any
attempt to install this product by any person who is not a trained professional car alarm installer may
result in severe damage to the vehicle or the components.
If you want a DIY installation, please study this entire user manual and all the wiring diagram carefully
before you start installation and only make sure you understand everything then beginning. You may
need to search the internet for your specific vehicle wiring diagram to learn how to find the related wires
and how to connect them properly.
Once you find correct wires, please solder them well or use crimp connectors to connect them together
to avoid the possibility of them becoming disconnected and causing the unit to fail. If there are any
questions, please contact EASYGUARD authorized dealer or contact EASYGARD electronics directly for
help.
Safety Warning!
The following safety warnings must be observed at all the time:
Due to the complexity of this system, installation of this product must be finished by a professional car
alarm installer or trained alarm installer.
This item is not fit for vehicles with push start button already, double locking or unlocking pulse
signals.
If your vehicle is diesel, which typically require longer engine starting/cranking time (more than 3
seconds), you can turn on the vehicle first to pre-warm the spark plug, then start the car or add an extra
timer delay switch when installing this item. Please consult with your alarm installer or contact
EASYGUARD electronics directly for advice before you start the installation.
IMPORTANT:
-02-
©
EASYGUARD
Electronics
.
All
right reserved.
