6.0 Servicing the Soda Blast Unit
This section covers the routine servicing of the Model 2-PS.
6.1 Servicing the Model 2-PS
1. Turn off the safety lockout air valve located at the front of the pressure vessel
and lock it out. (side ways position)
TURN OFF THE SOURCE OF COMPRESSED AIR TO THE UNIT.
2. Vent the pressurized air from the delivery unit using the vessel valve located on
the top of the pressure vessel unit. Turn valve slowly (earplugs recommended)
releasing air pressure.
3. CHECK TO MAKE SURE SYSTEM IS TOTALLY DEPRESSURIZED.
DISCONNECT UNIT FROM COMPRESSED AIR SUPPLY.
Inspect all components (hoses, nozzles, etc.) for wear and damage. Replace as
required.
Inspect all controls (tubing, hand operated lever, water ball valve, etc.) for
damage and wear.
TEST unit to ensure proper operation.
