Installation 19
Adjust the leveling legs to support the PFU/Infeed Conveyor/Inverter module and
level the Infeed Conveyor so it is level with the exit conveyor, and also level along
both the machine-direction axis and transverse direction axis. Carefully align holes
in attachment flanges with bolt holes in machine base. Use the bolts provided to
fasten the two sections together.
III. Place the Scrap Film Take-up Spool near the L-Sealer, near where the scrap film
will exit from the L-Sealer. Position the spool in line with exiting scrap film so the
distances will be approximately equal from the scrap film exit to the take-up spool
tensioner, and from the tensioner to the spool hub.
L-Sealer
Fasten Infeed Conveyor
module and L-Sealer module
together.
Move Scrap Take-up Spool
into position and make cable
connections.
Infeed
Conveyor
L-Sealer
Power Film Unwind (PFU)
Use leveling feet
at each of four
corners to lift module
off casters and level
infeed conveyor.
Infeed
Conveyor
Level
Lev
el
Summary of Contents for EA Professional Series
Page 2: ......
Page 4: ......
Page 64: ...64 Appendix B Temperature Setting Specifications Appendix A Electrical Schematics...
Page 70: ......
