Eastey EA Professional Series, User Manual

Page: 32 / 70

32 Operation
9. To adjust the infeed conveyor position for the width of the product package,
release the locking foot near the center of the conveyor and the conveyor can be
moved freely front to back. Re-engage the locking foot when the conveyor is
positioned correctly.
10. Note how the top and bottom film layers are routed over-to-under and under-to-
over the inverter rods. (See the illustration on the following page.) This changes
the direction and inverts (turns film inside-out) the film and allows the operator to
insert product on the product tray between the top and bottom layers of film to
place the product inside the film to be moved the sealing area. Do not place
product in the first few bags formed by the sealer: they will not have any
perforation holes in them (because the sealer and pin perforator work together).
Perforation is required to allow air to vacate when the product passes through the
shrink tunnel.
1" Clearance
Product
Height
Package
1"
Package
H=
½ × H = D D
Machine Direction
Seal / Cutter
approximately
Keep this angle
equal to
this
angle.
Centerline of
Inverter
Rod
Top
For Adjusting
Distance “D”
Pull Handle
For Adjusting
Height “H”
Hand Wheel
Release Foot Brake; Adjust Distance “D”
Inverter
Rod
Bottom
Down To
Lock Position
Press Lever
Press Back Levers
Down To Unlock
Lift Lever Up or