44 Adjustments
Fine Tuning the Sealer
To achieve maximum efficiency, individual controls can be tuned to improve productivity.
Here are some helpful hints.
1. Shorten dwell time as much as possible without jeopardizing the seal’s integrity.
This will minimize cycle time and increase products-per-minute output.
2. Lower the seal head to the point where it will clear the product only by a very
minimal distance. This will reduce cycle time also and increase output.
3. Reduce the bag-length at the end of the product as much as possible without
jeopardizing the integrity of the seals. To do this, decrease the time on the bag-
length timer as much as possible while still clearing the product with the seal
head. This will save cost of film and also reduce the amount of time that the
product will need to heat in the tunnel.
4. Determine the tunnel settings necessary to get the most desirable package. The
tunnel conveyor speed is at or slightly slower than the speed you should set the
seal conveyors. The closer the speed of the tunnel conveyor to the speed of the
sealer’s exit conveyor, the smoother your operation will run.
Summary of Contents for EA Professional Series
Page 2: ......
Page 4: ......
Page 64: ...64 Appendix B Temperature Setting Specifications Appendix A Electrical Schematics...
Page 70: ......
