Eastey EA Professional Series, User Manual

Page: 24 / 70

24 Operation
Infeed Conveyor — The Infeed Conveyor is used to facilitate insertion of the product
between the bottom and top layers of film and transport the product into the seal area.
Width and Height Adjustment
— The Infeed Conveyor is on rollers andmovable back
to front to adjust for and achieve proper placement of the total width of the package.
Once this has been adjusted, a clamping foot holds the Infeed Conveyor horizontal
position, thereby allowing the product to be placed precisely in the seal area and film
each time. Film height adjustment allows the film centering roller and separator rod to
be raised or lowered for differing product heights. A vertical screw mechanism raises,
and lowers inverter rods for height adjustment
Operator’s Panel
The operator’s panel is a fully functional color touch screen. It displays current status
information and displays buttons for configuring and controlling the system. The Main
Screen of the panel interface is shown here.
*If your sealer is a smaller model, instead of “Right Front” and “Left Front” there may be only one heater
bar, for which “Front” temperature is displayed.