Dream LADDER Assembly Step #13
Counter sink holes
face each other
6”
17”
28”
39”
50”
61”
Counter sink holes
face each other
6”
Layout 2 - LS4467 ladder rails and
6 - Ladder rungs
NOTE: Counter sink holes face
each other.
Measure from the top which is the
counter sink holes side. Using the
measurements above (as shown in
the photo).
Screw the ladder rungs into
ladder using 1½” Screws. (as
shown in the photo).
Measurements are to center of
rungs. Continue until all 6 rungs
are screwed in.
Ladder is now complete!
Install JB4458 Jacobs Ladder
Bottom rail to the ladder. Make
sure to leave 3½” overhang on the
right side of ladder and flush with
the bottom.
Notice all holes
are facing UP.
Jb4458
3½”
Using holes provided install
2 - 5” lags on each side.
3½”
Dream LADDER Installation Step #14
Place ladder into front
opening. Hold top of
ladder flush with top
of floor (as shown in
photo). Jacobs
Ladder Bottom rail
should stick out
towards the slide wall
opening.
NOTE: Holes for
Jacob’s Ladder face
Slide Wall
Opening
Using 2 - 5” Lag bolts. Bolt the ladder
into Post using holes provides (As
shown in picture).
L
S
4
4
6
7
L
S
4
4
6
7
