manualshive.com logo in svg

Eagle FishStrike 2000, Installation And Operation Instructions Manual

The Eagle FishStrike 2000 is the ultimate fishing companion. With its advanced sonar technology and precise GPS navigation, it helps you locate and catch fish effortlessly. Explore its full potential with the comprehensive Installation and Operation Instructions Manual available for free download from our website.

Share
Download
background image

160

Menu sequence for turning on Track Smoothing.

Trail Options

There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated and the way they’re displayed. Trails also may
be hidden, created or deleted in the trail menu.

General Trail Options

To access the Trails Menu:
Press 

MENU

|

MENU

|

↓

 to 

M

Y 

T

RAILS

|

ENT.

 

 

My Trails command (left); Trails Menu (left); Trail Options (right).

Delete All Trails

To remove all trails from memory, from the Trails Menu, press 

→

 to

D

ELETE 

A

LL

|

ENT

|

←

 

to 

Y

ES

|

ENT.

Update Trail Option

This menu lets you change the way the trail updates occur.

WARNING:

If you 

uncheck

 the Update Trail option, automatic trail

creation and recording will be turned 

off

. You must turn

it back on to record trails. The default setting is on.

From the Trails Menu, press 

→

 to 

O

PTIONS

|

ENT

. With 

U

PDATE 

A

CTIVE 

T

RAIL

highlighted, press 

ENT 

to check it (turn on) or uncheck it (turn off).

Summary of Contents for FishStrike 2000









































































































































































































Reviews:

No comments

Related manuals for FishStrike 2000

deeper START Manual preview
START
Brand: deeper Pages: 99
DANOPLUS DP-104 User Manual preview
DP-104
Brand: DANOPLUS Pages: 2
Humminbird 110 Fishin' Buddy User Manual preview
110 Fishin' Buddy
Brand: Humminbird Pages: 1

Brands by name

Popular brands

Load more brands