manualshive.com logo in svg

Eagle FishStrike 2000, Installation And Operation Instructions Manual

Share
Download
Eagle FishStrike 2000 Installation And Operation Instructions Manual Download Page 155

147

Navionics chart showing Tide Station icon selected by the cursor.

In the example above, the tide is at 2.8 feet and falling,

as shown by the down arrow at the top of the icon.

  

Tide Information screen.

The Tide Information screen displays daily tidal data for the station at
the present time. The graph at the top of the screen is an approximate
view of the tidal range pattern for the day, from midnight (MN), to
noon (NN) to midnight (MN). The dotted line across the graph is the
Mean Lower Low Water line (MLLW).

The height scale on the top right side of the graph changes, based upon
the maximum 

range

 of the tide for that day. The MLLW line also

adjusts its position as the height scale changes.

Tide Station
icon

Cursor line

Pop-up
name box

Summary of Contents for FishStrike 2000









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands