manualshive.com logo in svg

Eagle FishStrike 2000, Installation And Operation Instructions Manual

The Eagle FishStrike 2000 is the ultimate fishing companion. With its advanced sonar technology and precise GPS navigation, it helps you locate and catch fish effortlessly. Explore its full potential with the comprehensive Installation and Operation Instructions Manual available for free download from our website.

Share
Download
background image

158

Show WAAS Alarm

When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS. Here's how:

1. Press 

MENU

|

MENU

|

↓

 to 

GPS S

ETUP

|

ENT

|

↓

 to 

S

HOW 

WAAS A

LARM

.

2. With the option highlighted, press 

ENT 

to uncheck it (turn off) or

check it (turn on). After the option is set, press 

EXIT

|

EXIT

 to return to

the page display.

Software Version Information

From time to time, Eagle updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.eaglesonar.com.
These upgrades make the unit perform better or introduce a new
feature or function. You can find out what software version is running
in your Unit by using the Software Information command.

 

Software Information command (left); Software Information (right).

1. Press 

MENU

|

MENU

|

↓

 

to S

YSTEM 

S

ETUP

|

ENT

|

↓

 

to S

OFTWARE 

I

NFO

|

ENT

.

2. Read the information displayed on the screen.
3. To return to the last page displayed, press

 EXIT

|

EXIT

|

EXIT.

Sounds and Alarm Sound Styles

Sounds triggered by key strokes and alarms can be adjusted:

You first press

 MENU

|

MENU

|

↓

 

to

 S

OUNDS

|

ENT

.

Summary of Contents for FishStrike 2000









































































































































































































Reviews:

No comments

Related manuals for FishStrike 2000

Brands by name

Popular brands

Load more brands