manualshive.com logo in svg

Eagle FishStrike 2000, Installation And Operation Instructions Manual

The Eagle FishStrike 2000 is the ultimate fishing companion. With its advanced sonar technology and precise GPS navigation, it helps you locate and catch fish effortlessly. Explore its full potential with the comprehensive Installation and Operation Instructions Manual available for free download from our website.

Share
Download
background image

137

navigation begins. Press 

EXIT

 to clear the alarm.) When navigation

starts, press 

↑

 to increase speed to the desired setting.

4. Press 

EXIT

 to turn off the steering and speed boxes. The unit will now

automatically "steer" along the trail or route. When you arrive at your
"destination," cancel navigation.

Tip:

You can pick any spot on the map to begin your simulation by using
the Initialize GPS command.

Hide GPS Features

If there is no GPS antenna/receiver module attached to this unit, the
GPS menus and features can be hidden from view with this command.
The default setting is off, allowing you to rotate between the Sonar
Page and the GPS pages. To hide GPS features:

Press 

MENU

|

MENU

|

↓

 to 

S

YSTEM 

S

ETUP

|

ENT

|

↓

 

to  H

IDE 

GPS F

EATURES

|

ENT

.

The GPS menus and pages are now hidden.

To restore 

GPS F

EATURES

,

 press 

MENU

|

MENU

|

↓

 to 

S

HOW 

GPS

F

EATURES

|

ENT.

 The GPS menus and pages are available once again.

Initialize GPS

This command makes the unit operate as if it is sitting someplace other
than its actual location. So, you and your unit could be located in
Kansas City, but practice navigating in the ocean off Islamorada,
Florida.

1. With the GPS simulator off, press 

MENU

|

MENU

|

↓

 to

 

GPS

S

ETUP

|

ENT

|

ENT.

2. A message appears, telling you to move the cursor near the desired
location and press 

ENT.

 When the message automatically clears, follow

the message instructions. Turn on the GPS Simulator.

3. In a moment, your present position marker arrow appears on the
map in the location you selected with the cursor. The unit will consider
that spot as its last known position until changed by either a live
satellite lock-on or a new simulator location.

Map Auto Zoom

This receiver has an auto zoom feature that eliminates a lot of the
button-pushing characteristics of other brands of GPS receivers. It
works in conjunction with the navigation features.

First, start navigating to a waypoint. (See the waypoint section for
more information on navigating to a waypoint.) With auto zoom on, the
unit zooms out until the entire course shows, from the present position
to the destination waypoint.

Summary of Contents for FishStrike 2000









































































































































































































Reviews:

No comments

Related manuals for FishStrike 2000

Humminbird 798c Operation Manual preview
798c
Brand: Humminbird Pages: 210

Brands by name

Popular brands

Load more brands