manualshive.com logo in svg

Eagle FishElite 480, Installation And Operation Instructions Manual

The Eagle FishElite 480 is a top-notch fishfinder designed to enhance your fishing experience. It comes with an easy-to-follow Installation And Operation Instructions Manual for a hassle-free setup. Download the manual for free from our website to unlock the full potential of this remarkable product.

Share
Download
background image

46

Timers

 command: controls the up timer, down timer and alarm clock

settings.

Browse MMC Files

 command: this allows you to view the installed

MMC card and the files it contains.

Pages

The unit has four Page displays that represent the four major operating
modes. They are the Satellite Status Page, the Navigation Page, the Map
Page and Sonar Page. They are accessed by pressing the 

PAGES

 key,

then using 

→

 or 

←

 to select a Page. (Clear the Pages Menu by pressing

EXIT

.)

Pages Menu, showing some Sonar display options.

Satellite Status Page

The Satellite Status Page provides detailed information on the status of
the unit's satellite lock-on and position acquisition. To get to the Satel-
lite Status Page: Press the 

PAGES

 key, then use 

→

 or 

←

 to select 

S

TATUS

.

(Clear the Pages Menu by pressing 

EXIT

.)

This page represents a GPS function, so it is discussed in much greater
detail in Sec. 6.

No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed.

WARNING:

Do not begin navigating with this unit until the numbers
have stopped flashing!

Summary of Contents for FishElite 480













































































































































































































Reviews:

No comments

Related manuals for FishElite 480

Hobie Kit III Instruction Manual preview
Kit III
Brand: Hobie Pages: 10

Brands by name

Popular brands

Load more brands