Eagle FishElite 480 Installation And Operation Instructions Manual Download | Manualshive

Page: 199 / 204

background image

191

EAGLE DATABASES LICENSE AGREEMENT

THIS IS A LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST
PURCHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL,
FAMILY, OR HOUSEHOLD USE ("YOU") AND EAGLE ELECTRONICS, A
DIVISION OF LEI, THE MANUFACTURER OF THIS PRODUCT ("WE",
"OUR", OR "US"). USING THE PRODUCT ACCOMPANIED BY THIS LI-
CENSE AGREEMENT CONSTITUTES ACCEPTANCE OF THESE TERMS
AND CONDITIONS. IF YOU DO NOT ACCEPT ALL TERMS AND CONDI-
TIONS, PROMPTLY RETURN THE PRODUCT WITHIN 30 DAYS OF PUR-
CHASE. PLEASE RETURN USING THE ENCLOSED UPS SHIPPING LABEL
AND INCLUDE: PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE
NUMBER. YOUR PURCHASE PRICE AND ANY APPLICABLE TAXES WILL
BE REFUNDED. PLEASE ALLOW 4-6 WEEKS TO PROCESS YOUR RE-
FUND.

1. This License Agreement applies to the one or more databases that

your product may contain. We refer to these singly as a "Database"
and together as the "Databases." Your product may thus include the
"WBS Database" which contains worldwide background surface
mapping data, the "SmartMap Database" which contains inland
mapping data, or other Databases.

2. The Databases that your product may contain are licensed, not sold.

We grant to you the nonexclusive, nonassignable right to use these
Databases for supplemental navigation reference purposes, but only
as long as you comply with the terms and conditions of this License
Agreement. We reserve the right to terminate this license if you vio-
late any aspect of this License Agreement. You are responsible for
using official government charts and prudent navigation for safe
travel.

3. The Databases housed in your product are protected by the copy-

right notices appearing on the product or its screen(s). You may
NOT modify, adapt, translate, reverse engineer, decompile, disas-
semble, rent, lease, or resell any Database, and you may NOT create
derivative works based upon any Database or its contents.. Any un-
authorized reproduction, use, or transfer of a Database may be a
crime and may subject you to damages and attorney fees.

4. This License Agreement will terminate immediately without prior

notice from us if you fail to comply with or violate any of the provi-
sions of this Agreement. Upon termination, you will promptly return
all products containing one or more Databases to us.

5. Prices and programs are subject to change without notice.

6. This License Agreement shall be governed by the laws of the State of

Oklahoma and comprises the complete and exclusive understanding
between you and us concerning the above subject matter.

«
...
197
198
199
200
201
...
»

Summary of Contents for FishElite 480













































































































































































































Reviews:

No comments

Related manuals for FishElite 480

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands