EAE EE-C18E, Installation, Operation, And Parts Manual

Page: 19 / 40

Installation, Operation and Parts Manual
EE-C18E
19
4.4 Items to be checked after installation
S/N Check items YES NO
1 Screw torque of expansion bolts : 110 N•m; √
2 Rising speed ≥ 20mm/s; √
3 Noise with rated load ≤ 75db; √
4 Grounding resistance: not bigger than 4 Ω ; √
5 Height difference of the two carriages ≤ 5mm; √
6 Mechanical catch unit is robust and synchronized when running with rated load ; √
7 If the control button works as “hold to run”? √
8 If limit switches work well? √
9 If grounding wire is connected? √
10 If rising and lowering smoothly? √
11 If there is no abnormal notice during running with rated load? √
12 If there is no oil leakage when running with rated load? √
13 If expansion bolts, nuts or circlips are well secured? √
14 If the max lifting height is 1980mm? √
15 If Safety advices, name plate and logos are clear? √
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1 Check all connections of oil hose. Only when there is no leakage, the lift can start work.
5.1.2 The lift, if its safety device malfunctions, shall not be used.
5.1.3 It shall not lift or lower an automobile if its center of gravity is not properly positioned.
5.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5 When the lift is raised to the expected height, check again the stability before doing service or maintenance work underneath.