manualshive.com logo in svg

E-Mu Proteus 1000, Operation Manual

Share
Download
E-Mu Proteus 1000 Operation Manual Download Page 165

Proteus 1000 Operation Manual   

157

Save/Copy Menu

Copying Information

Copy Layer

The Copy Layer command lets you copy any layer information from one 
preset into any layer of the current preset location. The layer information 
in the source location (the layer location from which you want to copy) is 
not deleted from the original location, just copied to the destination 
location.

  

To Copy a Layer

1.

Select the Preset and Layer you want to copy information into.

2.

Press the Save/Copy menu button.

3.

Scroll to the Copy Layer screen using the data entry control.

4.

Move the cursor to the bottom line on the display.

5.

Select the preset location using the Data Entry Control, of the preset 
containing the information you want to copy into the current preset.

6.

Move the cursor to the top line in the display.

7.

Select the layer of the source preset in the first field on the right.

8.

Select the destination layer in the second field.

9.

Press the Enter/Home button.

COPY   LAYER      User        

L1   ->   L4

020

1

  Source Preset

Summary of Contents for Proteus 1000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands