manualshive.com logo in svg

E-Mu Proteus 1000, Operation Manual

Share
Download
E-Mu Proteus 1000 Operation Manual Download Page 125

Proteus 1000 Operation Manual   

117

Edit Menu

Pitch Bend Range

Pitch Bend Range

Specifies the Pitch Wheel range in semitones for the current layer. Pitch 
Wheel is a standard synthesizer control which is transmitted as a MIDI 
continuous controller message used (normally) to bend the pitch up and 
down.

The PitchBend range is from 0 to +12 semitones or “Master.” A setting of 
“0” turns the pitch wheel Off for the current layer. The Master setting uses 
the Pitch Bend range defined in the 

Master menu

.

Mix Output

This feature allows you to program the Effect Send as a part of the preset. 
Note that for this feature to work, the Mix Output setting in the Master 
menu MUST be set to “Preset” on the selected MIDI channel. If you want to 
define output routing by MIDI channel, set it up using the Mix Output page 
in the Master menu.

 See “Mix Output” on page 37 for more information.

The Sends function as effect processor inputs (effect sends). The Output 
Routing field shows the true routing of the Sends to the Main output. The 
Output Routing never changes!

  

To Control the Mix Output from the Preset:

1.

Move the cursor until it is underneath the Layer field and change the 
Layer using the Data Entry Control.

2.

Move the cursor until it is underneath the FX Send Routing field and 
change the Send (1-4) using the Data Entry Control.

3.

Locate the MIX OUTPUT screen in the Master menu.

4.

Set the MIDI channel you are using to “use preset”.

L1

  PITCHBEND RANGE

   +/-  12 semitones

L1

 MIX OUTPUT

Send2->main 

Output
Routing

FX Send
Routing

Summary of Contents for Proteus 1000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands