manualshive.com logo in svg

E-Mu Proteus 1000, Operation Manual

Share
Download
E-Mu Proteus 1000 Operation Manual Download Page 13

 

Proteus 1000 Operation Manual   

 

5

Important Safety Instructions

Product Description

 

13.

 

The Proteus 1000 should be serviced by qualified service personnel 
when:

A. The power supply cord has been damaged; or

B. Objects have fallen, or liquid has been spilled into the unit; or

C. The unit has been exposed to rain; or

D. The unit has been dropped or the enclosure damaged; or

E. The Proteus 1000 does not operate normally or exhibits a marked 

change in performance.

 

14.

 

All servicing should be referred to qualified service personnel.

 

Save These Instructions

Radio and 
Television 
Interference

 

The equipment described in this manual generates and uses radio-
frequency energy. If it is not installed and used properly —that is, in strict 
accordance with our instructions— it may cause interference with radio 
and television reception.

This equipment has been tested and complies with the limits for a Class B 
computing device in accordance with the specifications in Subpart J of Part 
15 of the FCC rules. These rules are designed to provide reasonable 
protection against such interference in a residential installation. However, 
there is no guarantee that the interference will not occur in a particular 
installation, especially if a “rabbit ear” TV antenna is used.

If Proteus 1000 does cause interference to radio or television reception, you 
can try to correct the interference by using one or more of the following 
measures:

 

•

 

Turn the television or radio antenna until the interference stops.

 

•

 

Move Proteus 1000 to one side or the other of the television or radio.

 

•

 

Move Proteus 1000 farther away from the television or radio. 

 

•

 

Plug Proteus 1000 into an outlet on a different circuit than the television 

or radio.

 

•

 

Consider installing a rooftop antenna with a coaxial lead-in between the 

antenna and television set.

 

Copyright 
Information

 

It is the policy of E-MU / ENSONIQ to allow all users free, complete and 
unrestricted use to all of the presets, beats, riffs, patterns, and audition files 
contained in our products. However, we are unable to grant you a license to 
re-use, modify, create derivative works from, sell or redistribute the demon-
stration files (demos). In most cases, these compositions are copyright 
protected by their respective authors and are licensed to E-MU / ENSONIQ 
for product demonstration purposes only. Please contact E-MU / ENSONIQ 
with additional questions.

Summary of Contents for Proteus 1000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands