E-MORE 2M2S, Operation Manual

Page: 12 / 28

12
ENGLISH
HANDSET
1. Up / Down Keys
To adjust the height of the desk, keep pressing the "up" or "down"
key until the tabletop reaches the desired position.
2. Display Screen
Display the height value of the desk.
3. Memory Key (1 / 2 / 3 / 4)
After setting memory keys, the desk will move automatically to
the saved position.
How to set a memory key: Please select the desired position. Then press the S-key. Then
press the S-Key, the display will show a “S” and fl ashes. Whenever a programmed memory
key is pressed, the tabletop will automatically adjust to the entered/saved height.
4. Set Key
The set key saves all changed settings.
5. Anti-collision function
When the desktop encounters reverse resistance while moving, the desk will stop and
move slightly in the opposite direction.
6. Re-set Procedure
1. When the display shows “RST” press the DOWN key until the frame reaches its
lowest position, you hear a “beep” and the frame rebounds slightly. Now the re-set is
complete.
2. To force a re-set you have to move the frame to its lowest position by pushing the
DOWN key. Release the DOWN key briefl y and push it again for about 5 seconds until
you hear a “beep” and the frame rebounds slightly. The re-set is done.
To restore the factory settings (e.g., when a controller is replaced) press the UP and
DOWN button simultaneously until you hear a fi rst “beep” after 5 seconds and a
second “beep” after 10 seconds. Once the display shows “RST” proceed as described
under 1. Above.
Display S-Key
Memory Keys Up-/Down-
Tasten
CORRECT DISPOSAL
This sign indicates that this product must not be disposed through regular household waste within the European
Union. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. There you can obtain all
information necessary to dispose of this product properly. (WEEE-Reg.-Nr. DE: 52242201)
2. Desk Frame
Anti-Collission
Built-in load limit switch
Dynamic load: 120 KG max. (2M3S, 3 segments)
100 KG max. (2M2S, 2 segments)
Static load: 140 KG max. (2M3S, 3 segments)
120 KG max. (2M2S, 2 segments)
Speed: 40 mm/s (2M3S, 3 segments)
32 mm/s (2M2S, 2 segments)
SAFETY AND WARNING!
This product can be used by children age 8 years and older, a persons with reduced physical, sensory or mental capacity as
long as they have been given proper instructions / training on how to use the product in a safe way and understand the haz-
ards involved. Children shall not play with the product.
1. Electric Components:
Input Voltage: 100-240V, 50/60 Hz
Duty cycle: 10% max 2min on 18 min off
Automatic power off,
low energy consumption
TECHNICAL SPECIFICATIONS
5-year
warranty
USB-Slot
With charging
function on the back