2. Use a straight edge to draw a centerline on the
front edge of the rudder.
3. Sand a bevel on the rudder back from the
centerline as shown.
4. Cut slots for the three rudder hinges. The slots
are near the top, near the bottom, and in the
center. Use foam safe CA to install the hinges
into the rudder.
20
Summary of Contents for thunderbolt p-47
Page 1: ...P 47 Thunderbolt Assembly Manual...
Page 18: ...7 Glue the joiner wire and hinges using foam safe CA 18...
Page 44: ...Notes Notes 44...
Page 45: ...Notes Notes 45...