E-FLITE thunderbolt p-47, Assembly Manual

Page: 36 / 48


2. Use a razor saw to carefully shorten the motor
stick by 9/16" (15mm) if using the Park 400
outrunner motor, or 1" (25mm) if using the Park
450 outrunner motor.
Note : Due to possible variations in motor stick
length, it is best to confirm the amount required
to shorten the stick using your chosen motor
and mount before cutting the stick.

3. Attach your outrunner motor to the outrunner
motor mount using the hardware included or
provided with your motor if necessary.
Note : Some motors, like the Park 450
outrunner, may require the use of the included
aluminum spacers between the motor and
mount to provide adequate clearance for the
shaft collar.
36