4. Check the distance between each stabilizer
tip and each wing tip. Move the stabilizer as
necessary for alignment, making both distances
equal. Also make sure the stabilizer is centered
with equal amounts of the stabilizer on each
side of the fuselage. Once you have confirmed
proper alignment, use a felt tip marker to mark
the stabilizer where it lines up with the fuse. It is
best to mark the bottom of the stabilizer only as
you will not be able to remove marker without
causing damage to the paint finish.
A
A
A=A
3. Check the alignment of the stabilizer to the wing.
When viewed from the rear it must be level to
the wing. Sanding the opening in the fuse can
correct any misalignments.
A
A
A=A
16
Summary of Contents for thunderbolt p-47
Page 1: ...P 47 Thunderbolt Assembly Manual...
Page 18: ...7 Glue the joiner wire and hinges using foam safe CA 18...
Page 44: ...Notes Notes 44...
Page 45: ...Notes Notes 45...
