7. Attach the “Z” bend of the pushrod to the
aileron servo arm. Use a hobby knife or .050"
drill bit to ream out the servo arm if necessary
to fit the pushrod.
8. Turn the radio system on and plug the
Y-Harness lead into the receiver. Snap the clevis
onto the control horn. Thread the clevis either
in or out so the aileron is centered when the
servo is centered.
13
Summary of Contents for thunderbolt p-47
Page 1: ...P 47 Thunderbolt Assembly Manual...
Page 18: ...7 Glue the joiner wire and hinges using foam safe CA 18...
Page 44: ...Notes Notes 44...
Page 45: ...Notes Notes 45...