Now.that.you.have.confirmed.proper.response.of.the.tail.motor/rotor.to.gyro.and.transmitter.inputs,.it.is.time.to.
proceed.with.initial.adjustments.of.the.gyro.mode.and.gain.setting,.and.to.conduct.test.flights .
•. If you are using the G90 gyro, and have chosen not to utilize the remote mode and gain setting
control option, set the gain setting adjustment pot on the gyro to a value of approximately 0%
before conducting the first test flight after installing the gyro. This gain setting adjustment pot on the
gyro is the same pot that you will use for adjusting the gyro gain value after conducting test flights.
•. If.you.are.using.the.G90.gyro,.and.have.chosen.to.utilize.the.remote.mode.and.gain.setting.control.option,.you.
will.need.to.use.the.Channel.5.knob.on.the.transmitter.for.setting.the.mode.type.and.gain.value,.as.outlined.in.
the.following.steps: