Nose Cone
Propeller
Stakes
Parachute
Compartment
Charging Port
LED’s
Function Button
Launch Pad
2
Flying the Spinner Missile X
Replacing Damaged Propellers
1.
2.
Place the Spinner Missile X on the launch pad. Press the launch button and the rocket will
4 seconds before the parachute opens. For the rocket to reach
NOTE:
There is a 3 second delay from the time that the launch button is pressed and the Spinner
Missile X begins its launch. This allows time to walk a safe distance away from the missile.
Loading the Parachute
1.
Check for any entanglement of the parachute chords, untangle if necessary.
2.
Fold the bottom of the parachute over so it touches the base of the nose cone.
3.
Push the release piston down, then carefully insert the parachute chords and folded
parachute into the compartment.
4.
Push the nose cone down onto the compartment. Check that none of the parachute fabric
is stuck between the nose cone and the parachute compartment.
The Spinner Missile X features a parachute to reduce the impact during landings. Loading the
parachute correctly will reduce the possibility of a malfunctioning parachute.
To replace a damaged propeller, remove the screw holding it in place and slide the propeller
screw. If you are not able to remove the old propeller by hand, use pliers to assist.
Warning:
To avoid injury and damage, check the propeller
regularly for nicks and breaks and make sure it is
Use only the propeller intended for this product
Part# RGR4138.
Do not alter, repair, modify or customize the propellers
The Spinner Missile X includes an internal Lithium battery.
Never place or store this product in a hot location.
Keep the product in dry and cool environment at all times.
Use only the included USB cable to charge the Spinner Missile X
Charge the battery per instructions in this manual only.
Do not damage or puncture the Lithium battery.
Charge the Lithium battery every 6 months for maximum service life.
directly at
www.ragerc.com
or call 1-800-622-7223 M-F 9:00-5:00PM Mountain Time
Item number
Description
RGR4131
Spinner Missile X Electric Free-Flight Rocket
RGR4137
500mA USB Charger; Spinner Missile X
RGR4138
Propeller; Spinner Missile X
3
NOTE:
Missile X look for a location that
is free of trees or other obstructions
that the missile might get caught
landing spots like grass whenever
possible.
Before launching, observe the wind
direction. The Spinner Missile X will
drift downwind during its descent.
Check that there are no obstructions
in the downwind direction.
If any repairs to the foam are necessary,
use a sutiable foam-safe CA adhesive (Super Glue).
Make sure that the lines or
chute are not pinched by
the nose cone.
Make sure that the lines are
not twisted or tangled.
Lithium Battery Warning
Replacement Parts
its highest altitude
Packaging Contents:
Missile USB Charging Cable Launch Pad & Stakes
Warranty
Warranty Period: Rage warrants that the Spinner Missile XL (”product”) will be free from
origInal factory defects in materials and workmanship upon purchase (”Warranty Period”).
What is Not Covered - This warranty is not transferable and does not cover (a) cosmetic
damage, (b) damage due to act of God, assident, misuse, abuse, neglegence, commercial
use, or due to improper use, installation, operation or maintenance, (c) modification to any
part of the Product, (d) attempted service by enyone other than a Rage authorized service
center, or (e) Product not purchased from an authorized Rage dealer.
OTHER THAN THE EXPRESS WARRANTY ABOVE, RAGE MAKES NO OTHER WARRANTY OR
REPRESENTATION, AND THEREFORE DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGMENT,
MERCHANTABILITIES AND SUITABILITY FOR A PERTICULAR PURPOSE. THE PURCHASER
ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL MEET
THE REQUIREMENTS OF THEIR INTENDED USE.
Purchaser’s Remedy - Rage’s sole obligation and purchaser’s sole and exclusive remedy
shall be that Rage will, at it’s option, either (a) service, or (b) replace, any Product
determined by Rage to be defective. Rage reseves the right to inspect any and all Product(s)
involved in a warranty claim. Service or replacement decisions are at the sole discretion of
Rage. Proof of purchase is required for all warranty claims.
SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS
SOLE AND EXCLUSIVE REMEDY.
Limitations of Liability - RAGE SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR PRODUCTION OR COMMERCIAL
LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY,
EVEN IF RAGE HAS BEEN ADVISED OF THE POSSABILITY OF SUCH DAMAGES.
Further, in no event shall the liability of Rage exceed the individual price of the Product on
which liability is asserted. as Rage has no control over use, setup, final assembly,
modification or misuse, no liability shall be assumed nor accepted for any resulting damage
or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you ,
as the purchaser or user, are not prepared to accept the liability associated with the use of
the Product, purchaser is advised to return the Product immediately in new and unused
condition to the place of purchase.
Law - These terms are governed by Utah law (without regard to conflict of law principals).
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Rage reserves the right to change or modify this warranty at any time
without notice.
Rage, an exclusive brand of:
HRP Distributing, Inc.
2034 South 3850 West
Salt Lake City, Utah 84104
©HRP Distributing, Inc.
Printed in China
4
1
Specification
Motor Run Time
1 Press – 7 sec
2 Press – 9 sec
3 Press – 12 sec
Flying height:
Over 150ft (50m)
With 3 presses
Launches per Charge: Up to 20
Internal Battery:
3.7V 300mAh
LiPo Charging time: 40 minutes
Height:
10.7” (272mm)
Weight:
2.1 oz. (59.5g)
Prop:
6” weighted (152.4mm)
SAFETY WARNINGS:
• All of the safety and operating instructions should be read, adhered
to and followed before the unit is operated.
• To avoid injury, do not touch the product while flying or the propeller
while moving.
• Be careful to keep your body and any loose clothing away from the
moving propellor.
• Do not modify or change this product without authorization
Charging Instructions:
1
. Connect the included USB charge cord to the port located on the back side of the rocket
and the USB connector to a power source, such as a laptop.
Charge time is about 40 minutes.
2.
The main indicator light on the front of the rocket will be red during charging and will turn
off when the charge is complete.
CAUTION:
Use only the included USB
charger to charge the
Spinner MIssile XL battery.
Other chargers may damage
this product.
INSTRUCTIONS
Printed 06/22
Up to 40
Up to 150’ (50m)
3.7V 250mAh LiPo
30 Minutes
1.7 oz. (49g)
Power LED
Nose Cone
Parachute Compartment
Launch Button
Weighted Propeller
Launch Pad
Charging Port
Launch Pad
Missile
USB Charging Cable
Instruction Manual
Motor Run Time
Flights Per Charge
Flying Height
Internal Battery
Charge Time
Missile Weight
Missile Height
9” (228mm)
1.
Connect the included USB charger to the charge port on the Spinner Missile X and a USB power
source, such as a laptop. The indicator light on the USB charger will be red during charging and
turn off when the battery is fully charged. Charge time is about 30 minutes.
2.
Disconnect the USB charger when the battery is fully charged. Do not attempt to over charge!
CAUTION:
Use only the included USB
charger to charge the
Spinner Missile X battery.
Other chargers may damage
the product!
1 Press = 4 Sec
2 Press = 8 Sec
Specifications
Package Contents:
Charging Instructions:
1
X
4
8
4
