User Manual HTS801
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 6
The device may only be powered as described in this manual.
In order to avoid damage to the instrument or health hazards, the measuring equipment must never be
manipulated with tools that are not specifically described in this manual. The sensor may only be utilized in
accordance with the conditions defined in the technical data. Otherwise, measurement inaccuracies will occur and
equipment failures cannot be ruled out. The steps recommended by the manufacturer for installation, inspections
and maintenance work must be observed and carried out for the safety of the user and for the functionality of the
equipment.
Unauthorized product modification leads to loss of all warranty claims. This may be accomplished only with an
explicit permission of E+E Elektronik!
WARNING
Non-compliance with the product documentation may cause safety risk for people and the entire
measurement installation.
The manufacturer cannot be held responsible for damages as a result of incorrect handling, installation and
maintenance of the device.
▪.
Do not use HTS801 in explosive atmosphere or for measurement of aggressive gases.
▪.
This device is not appropriate for safety, emergency stop or other critical applications where device
malfunction or failure could cause injury to human beings.
▪.
The device may not be manipulated with tools other than specifically described in this manual.
NOTICE
Failing to follow the instructions in this user manual may lead to measurement inaccuracy and device
failures.
▪.
The HTS801 may only be operated under the conditions described in this user manual and within the
specification included in chapter 9 Technical Data.
▪.
Unauthorized product modification leads to loss of all warranty claims. Modification may be accomplished
only with an explicit permission of E+E Elektronik Ges.m.b.H.!
1.2.5.
Mounting, Start-up and Operation
The HTS801 humidity and temperature sensor has been produced under state of the art manufacturing
conditions, has been thoroughly tested and has left the factory after fulfilling all safety criteria. The manufacturer
has taken all precautions to ensure safe operation of the device. The user must ensure that the device is set up
and installed in a way that does not impair its safe use. The user is responsible for observing all applicable local
and international safety guidelines for safe installation and operation of the device. This user manual contains
information and warnings that must be observed by the user in order to ensure safe operation.
PLEASE NOTE
The manufacturer or his authorized agent can be only be held liable in case of willful or gross negligence.
In any case, the scope of liability is limited to the corresponding amount of the order issued to the
manufacturer. The manufacturer assumes no liability for damages incurred due to failure to comply with the
applicable regulations, operating instructions or the specified operating conditions. Consequential damages
are excluded from the liability.
