E+E Elektronik HTS801, User Manual

Page: 50 / 64

User Manual HTS801
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 50
7.5 Fuse Replacement for Integrated Power Supply 100 - 240 V AC
(Option AM3)
WARNING
The AM3 option includes a 1.25 A fuse on the 100 - 240 V side. This fuse may not be replaced by the user,
only by the E+E after sales service.
The protection of the supply cable against excess current and short-circuit must be designated to a wire
cross section of 0.8 mm
2
(AWG 18) (6A fuse).
WARNING
There is the risk of electrict stroke and subsequential serous injury or death.
▪.
The metal enclosure must be grounded during operation.
▪.
All national regulations for installation shall be observed!
8 Spare Parts / Accessories
Description Code
E+E Product Configuration Software
(Free download: www.epluse.com/pcs10 )
PCS10
USB cable for PC connection (USB-A to USB-C) HA010327
Stainless steel mounting flange Ø12 mm (0.47") HA010201
Stainless steel mounting flange for Ø6 mm (0.24") T probe HA010207
Stainless steel wall mounting clip Ø12 mm (0.47") HA010225
Pressure-tight feedthrough
G1/2" ISO Ø12 mm
1/2" NPT Ø12 mm
G1/2" ISO Ø6 mm
1/2" NPT Ø6 mm
HA011102
HA011103
HA011104
HA011105
Humidity calibration kit see Humidity Calibration Kit data sheet
Conduit adapter M16x1.5 to NPT 1/2" HA011101
Drip water protection HA010503
Radiation shield with artificial ventilation for HTS801-M1T28 HA010508
Radiation shield for RH probe HA010502
Radiation shield for T probe HA010506
Bracket for DIN rail mounting
1)
HA010203
Wall Mounting Clip Ø12 mm (0.47”) HA010211
Ethernet module for retrofitting, polycarbonate enclosure only HA010606
Immersion well, stainless steel Ø6x135 mm (0.25 x 5.4")
1/2" ISO
1/2" NPT
HA400202
HA400212
1) For polycarbonate enclosure only. Two pieces are necessary for each HTS801