Rev. 4.0
33
[email protected] • www.e-breathe.de
e-breathe Smartblower
2.2 Filter
The choice of filter depends, among other things, on the type of contamination and concentration. The blower can be used either
with only one particle filter or by using the Y-connector with two particle filters. (See separate instructions for use of the filters)
The following filters are available for the e-breathe smartblower system:
Filter
e-breathe ecoPAD P3 R / PSL
e-breathe Particle Filter P3 R / PSL
Typ /
Class
Color
Code
Main Application Area
P3
white
P = For use against solid and liquid toxic, radioactive and harmful particles as well as microorga-
nisms such as bacteria and viruses.
R
R (reusable) = The particle filter is intended for multiple use and can be used over several wor-
king shifts.
SL
SL (Solid Liquid) = The particle filter can be used against solid and liquid aerosols.
Particle Filter
Prefilter
The pre-filters protect the main filter from premature clogging and handling damage. The prefilter must be inserted
into the prefilter holder. Important! The prefilter can only be used as a prefilter. It can never be used as a replacement
for a particle filter.
Important!
•
At least one particle filter has to be used in any case.
•
The used particle filters have to be of the same type.
•
When exchanging the filter, both particle filters have to be exchanged at the same time.
!
2.3 Breathing Hose
The breathing hose is not included in the scope of delivery of the blower or the respective head part.
The breathing hoses are available separately.
The breathing air hose has a round thread connection on the side that is screwed to the blower.
The following connections are available for the end part of the opposite end of the hose, which is attached to the
breathing connection:
•
e-breathe click plug connection
g
for overpressure hoods and blower protection suits
•
e-breathe Vario & MM plug connection
g
for blower-assisted face shields Multimask and Multimask Pro
•
DIN-Round thread connection
g
for full masks and half masks
