Dynapac DTR75D, Operating Instruction

Page: 111 / 122

9.2 Starting the engine with jump leads
NOTICE!
A wrong connection will cause severe damage
in the electric system.
– Bridge the machine only with a 12 Volt auxiliary
battery.
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
n Hearing protection
1. Remove the cap from the plus pole of the battery.
2. Flip open the cap of the pole clamp (minus pole).
3. First connect the plus pole of the external battery to the plus
pole of the starter battery using the first jump lead.
4. Next, connect the second jump lead to the minus pole of the
energizing external battery and then to the minus pole of the
starter battery.
5. Start the engine: Ä Chapter 6.2 ‘Starting the engine’
on page 64 .
6. After starting, disconnect the minus poles first and the plus
poles after.
7. Fold down the caps or put them on again.
B-834-0343
Fig. 129
B-016-0055
Fig. 130
B-ELE-0027
12 V
Fig. 131
Troubleshooting – Starting the engine with jump leads
DTR75D 111