Dynapac DTR75D, Operating Instruction

Page: 73 / 122

6.7 Emergency procedures
6.7.1 Disconnecting the battery
In event of emergency, e.g. in case of a cable fire, disconnect the
battery from the vehicle network.
1. Flip open the cap.
ð
The pole clamp comes off the minus pole.
2. Remove the pole clamp from the battery and place it aside.
6.7.2 Deactivating the reversing protection
The reversing protection protects the operator from being crushed
between the machine and an obstacle during reverse travel.
If reversing protection is activated, the machine brakes to a stand-
still.
The travel lever is disengaged by the reversing protection, the
machine cannot be moved forward or backward.
Prerequisites:
n Reversing protection has been triggered.
n The machine is at a standstill.
n The travel lever is disengaged.
1. Step aside from the machine, slightly lift the steering rod for
this, if necessary.
2. Shift the vibration lever to position “0”, if necessary.
ð
Vibration is switched off after a short time.
B-834-0339
Fig. 79
B-834-0328
Fig. 80
Operation – Emergency procedures
DTR75D 73