Dynapac DTR75D, Operating Instruction

Page: 58 / 122

5.3.4 Checking the reversing protection
Prerequisites:
n The machine is on level, firm ground.
n Sufficient space to the rear without any obstacles.
1. Start the engine Ä Chapter 6.2 ‘Starting the engine’
on page 64 .
2.
CAUTION!
Danger of injury caused by the crushing
of body parts!
– When reversing, steer the machine from
the side using the steering handle.
Pull the travel lever slowly back.
ð
The machine drives backwards with a speed which corre-
sponds to the travel lever position.
3. Push in the reversing protection and check the proper func-
tion.
ð
Make sure the machine brakes until it comes to a stand-
still.
The travel lever must disengage.
4. If this does not work correctly, shut down the machine and
notify our Customer Service department.
5. Only operate the machine again after it has been repaired.
6. Shift the travel lever to neutral position.
ð
The travel lever is engaged again.
B-SYM-1205
Fig. 47
B-834-0324
Fig. 48
B-834-0321
Fig. 49
B-834-0325
Fig. 50
Checks prior to start up – Daily maintenance
DTR75D 58