Dynapac DTR75D, Operating Instruction

Page: 45 / 122

4.1.2 Operating hour meter
Maintenance work is to be carried out in accordance with the indi-
cated operating hours.
4.1.3 Starter switch
Position “0” Switch the ignition off
Ignition key can be removed
Position “I” Ignition on
Position “II” Turn further against spring pressure, the
engine starts
Turn the ignition key back to position “I”
when the engine starts.
The starter switch is designed with a re-start lock.
The ignition key must first be turned back to posi-
tion “0” before a new starting attempt can be
made.
4.1.4 Warning buzzer for engine oil pressure
sounds When starting up:
n Starter switch is in position "I" (ignition
on).
Must stop after the engine has started.
During operation:
n Low engine oil pressure detected.
n Shut down the engine.
n Check the engine oil level.
n If necessary, perform troubleshooting.
n Inform our Customer Service Depart-
ment.
B-GEN-0114
Fig. 26
Fig. 27
B-SYM-1217
Fig. 28
Indicators and control elements – Machine
DTR75D 45