Operation
2018-02-19
4812325557EN
41
Starting
Screen - Control
Sit down for all operations.
Turn the ignition key (1) to the position I and the initial screen
is shown in the Control panel (2).
Check if the voltmeter (3) appoints at least 24 volt and if the fuel
(4) and water (5) levels show a percentage value.
The hourmeter (6) records and shows the total quantity of the
engine working hours.
Starting the engine
Make sure the emergency stop system (2) is off (upper position)
and the parking brake is on.
The forward/reverse lever (1) shall be in the neutral position.
The Diesel engine cannot be started if the lever is not in this
position.
When sitting on the operator's seat, turn the ignition key (3) to
the right (the first position I) and then to the start position.
Release the switch as soon as the engine starts.
Do not try to run the start engine for too long (max.
30 seconds). If it does not work, wait 60 seconds to
try again.
Let the engine idle for a few minutes or more if the environment
temperature is below 50 F (10º C).
When the engine is running indoors, make sure
if there is proper ventilation to extract the
exhaust gases.
1
2
Fig.
– Side panel
1. Ignition key
2. Control Panel
6
4
5
3
Fig.
– Status screen
3. Voltmeter
4. Fuel level
5. Water level
6. Hourmeter
1
Fig. - Control panel
1. Forward/reverse lever
2. Emergency stop button
3. Ignition key
3
2
