Special instructions
104
4812325557EN
2018-02-19
Battery handling
When removing the batteries, always turn off
the negative cable first.
When mounting them, always turn on the
positive cable first.
Dispose of the used batteries in an
environmentally-friendly way. They do not
contain toxic lead.
Never use fast charging in the battery. There is
a risk of reducing its useful life.
Jump starting (24V)
Do not connect the negative cable to the
negative pole in a dead battery. A spark may
ignite a gas mixed combustion containing
oxygen and hydrogen formed around the
battery.
Check if the battery used for the jumper starting
and the dead battery have the same tension.
Turn off the ignition key and all the power
consuming equipment. Turn off the roller engine
supplying power to the jump starting.
The jump starting cables must have 24V.
Auxiliary starting
When using a booster battery besides the ones
installed on the roller, always connect the
positive post (+) of the booster battery to the
positive post (+) of the installed battery, as well
as the negative post (-) of the booster battery to
the negative post (-) of the installed battery.
Turn on the machine engine supplying power
and let it work for a little while. Next, try to turn
on the other machine. Then disconnect the
cables in the reverse order.
