23
CC 100 M100EN1
EVERY 2000 HOURS OF OPERATION (Yearly)
Risk of scalding when draining hot oil.
Protect your hands.
1. Arrange a vessel of at least 40 litres to drain the fluid.
2. Unscrew the drain plug (1) and allow all the fluid to run
out and then refit the plug.
3. Fill with fresh hydraulic fluid in accordance with the
quality recommendations on page 3.
4. Change the hydraulic filter, see page 20.
5. Start the engine and operate the various hydraulic
functions, check the fluid level and top up as required,
see page 10.
Ensure that ventilation is adequate
(extractor) when running the engine indoors.
(Hazardous carbon dioxide fumes).
1. Position the roller on a level surface and slowly drive
the roller till the oil plug (1) is at the bottom.
Risk of scalding when draining hot oil.
Protect your hands.
2. Place a vessel for at least 6 litres under the plug.
3. Unscrew the plug and allow all the oil to drain off.
4. See page 17 with regard to filling with oil.
Drum - Changing the oil
Fig. 37 Drum, vibrator side
1. Oil plug
Hydraulic fluid reservoir -
Changing the fluid
1
Fig. 36 Left side of roller
1. Drain plug
1
Water tank - Draining
Remember the risk of freezing during the
winter period. Drain the water tank, pumps and
piping.
1. The water tank is drained most easily by screwing
off the water filter (1).
(A drain plug is also provided at the bottom of the
tank).
1
Fig. 38 Pump system
1. Water filter
Summary of Contents for CC100
Page 2: ......
