10
CC 100 M100EN1
Fig. 5 Fuel tank
1. Filler cap
Refuel the roller every day before starting work. Fill fuel
up to the lower edge of the filler pipe. Use diesel fuel.
Stop the engine. Press the filler nozzle
against the filler pipe (1) to earth it while
refuelling.
(See the engine manufacturer’s recommendations with
regard to quality of the fuel.)
1
EVERY 10 HOURS OF OPERATION (Daily)
Fuel tank - Filling
Ensure that the scrapers are undamaged. Adjust the
scraper as follows:
1. Loosen the mounting bolts (1) and adjust the
scraper in relation to the drum, tighten the mounting
bolts.
2. If the scraper does not make contact all the way
across the drum, loosen the adjusting screws (2)
and push the scraper against the drum and then
tighten the adjusting screws.
Scrapers
Checking - Adjustment
2 1
1
2
Fig. 7 Hydraulic fluid reservoir
1. Fluid level glass
1
Hydraulic reservoir -
Checking
1. Position the roller on a level surface and check the
fluid level in the sight glass (1).
2. Top up with fresh hydraulic fluid if the level is 20 mm
(0,8 in) or more below the upper edge of the sight
glass, or if no fluid is visible in the sight glass.
Fig. 6 Drum
1. Mounting bolts
2. Adjusting screws
Summary of Contents for CC100
Page 2: ......
