18
CC 100 M100EN1
Controls - Lubrication
Lubricate the forward/reverse controls in the engine
compartment with a few drops of oil.
If the controls start to become stiff after a long period of
use, take off the cover and the forward/reverse lever at
the operator’s station and lubricate the mechanism.
1
2
Lubricate the forward/reverse control mechanism.
Take off the protective cover (1) by removing the
screws (2) at the top of the cover, and lubricate the
mechanism with oil.
Controls - Lubrication
EVERY 500 HOURS OF OPERATION (Every 3 months)
Fig. 24 Operator´s position
1. Forward/Reverse control
2. Mounting screws
1
Fig. 23 Engine compartment
1. Forward/Reverse controls
DEUTZ
1. Run the engine warm before draining.
Ensure that ventilation is adequate
(extractor) when running the engine
indoors. (Hazardous carbon dioxide
fumes).
Place the roller on a level surface, switch
the engine OFF and apply the reserve/
parking brake.
2. Place a receptacle for at least 8 litres underneath
the drain plug.
Risk of scalding when draining hot oil.
Protect your hands and arms.
3. Unscrew the drain plug (1) and allow all of the oil to
drain off. Refit the plug.
4. Fill with fresh engine oil, see page 3 or the engine
manual with regard to the right grade of oil.
Diesel engine - Oil change
1
Fig. 25 Engine compartment,
right-hand side
1. Oil drain
Summary of Contents for CC100
Page 2: ......
